- Updated to integrate a coefficient engine and additional signals for coefficient handling.
- Modified to include a coefficient engine, enhancing the encoding process with new signals.
- Improved to validate generated blocks against expected values and added timeout handling.
- Introduced for testing SRAM wrappers in JPEG workspace.
- Enhanced test coverage in to reject invalid STA net drivers.
- Updated to ensure proper coverage of canonical domains in timing contracts.
- Added a new test for JPEG coefficient engine in .
- Improved memory map tests in to validate public active MMIO regions.
- Enhanced management core specification tests in to verify high-performance core specifications.
- Added behavioral-only checks in to exclude synthesis and netlist consumers.
- Updated SDRAM tests in to track active firmware memory.
- Enhanced STA constraints tests in to cover current clock domains and net drivers.
- Implemented tests for the deterministic baseline JPEG reference model in , covering encoding, decoding, quality scaling, and error handling.
- Created to ensure synchronization between RTL and C register constants for JPEG.
- Updated to reflect changes in the number of APB interfaces and IRQ mappings, ensuring the topology generates correct bindings.
- Introduced and its corresponding testbench to monitor fabric interactions.
- Updated to include additional checks for ACL and QoS, enhancing the test coverage.
- Modified to include the new fabric monitor file.
- Created a new test file to validate the functionality of the fabric monitor.
- Updated to integrate the fabric monitor interface.
- Adjusted to reflect changes in the AXI4 data crossbar test output.
- Enhanced to ensure proper generation of connections for the fabric monitor.
- Updated user extension tests to account for new local SRAM and stream definitions.
- Introduced to validate AXI4 interface for 64-bit on-chip SRAM.
- Added to test resource controller functionality including ownership, IRQ handling, and cache handshake.
- Updated to include resource controller interface.
- Enhanced to cover additional IRQ scenarios.
- Added new tests in for AXI4 target guard timeout and isolation.
- Updated to reflect changes in the high-performance profile.
- Modified to verify on-chip SRAM bank configurations.
- Added for directed verification of resource controller.
- Updated to check SDRAM mapped window coverage.
- Enhanced to ensure correct IRQ mappings and APB target generation.
- Implemented tests for AXI4 async bridge functionality, including transfer and warm flush scenarios.
- Added tests for AXI4 data crossbar to validate concurrent outstanding requests and ACL handling.
- Introduced clock frequency monitor tests to ensure detection of clock stop and restart events.
- Developed tests for extension DMA master to verify copy operations, tail strobe behavior, and timeout handling.
- Created tests for HP lifecycle controller to validate drain, flush, and forced reset functionalities.
- Updated existing test scripts to include new RTL components and ensure proper simulation configurations.
- Added interface to and implemented error handling for register writes.
- Introduced a new test for AXI4 address gate functionality in .
- Updated clock and reset domain assertions in to reflect new domain names.
- Modified expected outputs in to include new clock domains.
- Adjusted chip configuration assertions in to account for additional power pads.
- Enhanced memory map tests in with new definitions and includes.
- Updated pin mapping tests in to include new reference clock pads.
- Improved script tools tests in to ensure correct validation of extension bindings.
- Refined system control tests in to include new clock control interface.
- Updated USB2 packet RAM tests in to include new SRAM definitions.
- Enhanced user extensions tests in to validate new product extension configurations.
- Adjusted user IP register parity tests to use legacy extensions.
- Updated Yosys synthesis recipe tests to reflect changes in STA period calculations.
- Updated axi4_interconnect_tb to include an additional master and issue high-priority access tests.
- Introduced hp_mailbox_tb for testing the HP mailbox functionality, including register and doorbell operations.
- Added plic_tb to validate PLIC priority, claim, and completion mechanisms.
- Enhanced pll_ctrl_tb to initialize additional system control signals.
- Updated soc_irq_topology_tb to account for new IRQ sources and validate IRQ signal behavior.
- Improved sysctrl_tb to include tests for HP lifecycle control and status registers.
- Added tests for HP boot bundle layout, CRC, and payload validation.
- Introduced test_hp_mailbox.py for RTL regression testing of the HP mailbox.
- Added test_hp_platform.py to validate HP platform configuration and generated-source boundaries.
- Enhanced test_librelane_flow.py to ensure correct signal placement in chip configuration.
- Added performance log tests to validate LP and HP coremark ratios.
- Updated test_soc_topology.py to reflect changes in IRQ and peripheral mappings.
- Updated README.md to clarify the status of KianV RV32IMA and PicoRV32 in the user-extension map.
- Modified Makefile to include USER_EXTENSIONS_SOURCE in MPW variant stamp dependencies.
- Enhanced integration README.md to better describe the relationship between user_extensions.json and mpw.toml.
- Updated generate_user_extensions.py to include design_id in ExtensionTarget and enforce unique design IDs.
- Changed user_extensions.json schema version to 2 and added design_id fields for core and IP targets.
- Refactored generate_mpw.py to support the new manifest structure and validate design selections.
- Adjusted sysctrl_tb.sv test cases to reflect changes in user core reset states.
- Enhanced test_opipsram.py to utilize ccache for improved compilation performance.
- Updated test_script_tools.py to include new tests for active manifest generation.
- Modified test_user_extensions.py to validate isolated scalar bindings and reject duplicate design selections.
- Introduced a new USB2 transaction engine testbench to validate the functionality of the USB2 transaction engine.
- Updated clock and reset domain tests to include USB2 ULPI crossings.
- Enhanced memory map tests to verify USB2 base addresses and performance offsets.
- Modified pin map tests to ensure USB2 ULPI pins are correctly generated.
- Updated SOC topology tests to account for USB2 peripherals and IRQ mappings.
- Added static timing analysis constraints for USB2 clock domains.
- Created dedicated USB2 tests for various components including packet RAM, descriptor validation, and transaction engine.
- Implemented a register parity test to ensure ABI consistency between RTL and C header definitions.
- Updated filelist to include new XPI source files.
- Modified IRQ compatibility mapping for XPI in the SOC topology generator.
- Adjusted JSON topology configuration to reflect new IRQ signal naming.
- Changed software.mk to reference the new XPI HAL source file.
- Enhanced APB4 peripheral module to include XPI IRQ signal.
- Updated RTL style audit to include new XPI files.
- Documented new XPI programming script in README.
- Added a new script for programming XPI flash through OpenOCD.
- Enhanced XPI IO testbench to validate new LUT engine and isolation behavior.
- Created unit tests for the new XPI programming tool and its functionalities.
- Increased the number of masters in the AXI4 interconnect testbench from 5 to 6.
- Added new testbench for SPI-SD clock functionality (spisd_clock_tb).
- Introduced testbench for SPI-SD command engine (spisd_command_tb).
- Created testbench for SPI-SD CRC calculation (spisd_crc_tb).
- Implemented testbench for SPI-SD data handling (spisd_data_tb).
- Developed wrapper testbench for SPI-SD with APB and training checks (spisd_wrapper_tb).
- Added Python test suite for SPI-SD RTL regressions (test_spisd.py).
- Created a test for verifying register parity between RTL and C header definitions (test_spisd_register_parity.py).
- Introduced a new testbench for the SDIO wrapper () to validate APB interactions.
- Updated to include IRQ handling for SDIO0 and SDIO1.
- Enhanced to account for performance management of SDIO0 and SDIO1.
- Modified memory map tests to include SDIO base addresses and performance wait offsets.
- Updated pin mapping tests to include SDIO1 signals.
- Created a comprehensive suite of SDIO tests () covering various functionalities including CRC, command engine, DMA, and standalone operations.
- Added a new test for verifying SDIO register parity against the RTL definition.
- Adjusted SOC topology tests to reflect the addition of SDIO in the IRQ and APB fabric.
- Updated memory map tests to include OPI PSRAM address and size definitions.
- Introduced new test suite for OPI PSRAM to ensure RTL and HAL ABI consistency.
- Enhanced script tools tests to validate formal filelists for OPI PSRAM.
- Modified SOC topology tests to incorporate OPI PSRAM bindings and IRQ mappings.
- Introduced to define formal properties for the DMA design, ensuring correct behavior under various conditions.
- Created as a testbench for the DMA register interface, implementing APB and AXI4 protocols to validate register operations.
- Added to verify synchronization between RTL and SDK register constants, ensuring consistency across implementations.
- Introduced burst length handling in the SDRAM Verilator model, allowing for more flexible read/write operations.
- Added new SDRAM-related source files to the project structure, including sdram_pkg.sv and sdram_axi4.sv.
- Updated software makefile to include new SDRAM-related C source files for HAL.
- Enhanced C test suite with new tests for SDRAM timing and functionality, ensuring proper integration with the HAL.
- Improved RTL testbench for SDRAM, adding support for burst writes and reads, and verifying data integrity.
- Updated Python test scripts to reflect changes in SDRAM handling and ensure comprehensive coverage of SDRAM functionality.
- Added checks to ensure register offsets between RTL and HAL definitions match, maintaining consistency across the codebase.
- Updated filelist to include I2S related files.
- Enhanced formal file generation script to support I2S target.
- Introduced I2S formal design and properties for verification.
- Modified formal makefile to include I2S targets and source files.
- Added I2S related source files to software build.
- Updated style audit to include I2S files.
- Implemented I2S helper functions in C tests.
- Created I2S testbench for RTL simulation.
- Added regression test for I2S controller functionality.
- Introduced sysctrl_define.svh to define register offsets and constants for SysCtrl.
- Created sysctrl_if.sv interface for communication with SysCtrl.
- Implemented sysctrl_reg.sv module to handle register read/write operations and state management.
- Developed sysctrl_tb.sv testbench to validate SysCtrl functionality, including lifecycle, fault handling, performance monitoring, and RTC wake status.
- Added Python regression test (test_sysctrl.py) to automate SysCtrl verification using Icarus Verilog.
- Updated formal.mk to include PSRAM in formal verification targets and source files.
- Modified software.mk to include psram_math.c for HAL.
- Enhanced pin_map.json to map GPIO pins for PSRAM control signals.
- Refactored ip_ribp_wrapper.sv to integrate PSRAM interface and remove unused ribp interfaces.
- Updated rtl_style_audit.json to include PSRAM related files.
- Added PSRAM testbench (psram_tb.sv) for integration testing.
- Created test_psram.py to validate PSRAM controller functionality and register offsets.
- Adjusted memory map tests to reflect new PSRAM address space and size.
- Changed parameter names in various modules from uppercase to camel case for consistency.
- Updated local parameters in testbenches to follow the same naming convention.
- Modified the RTL style manifest to include additional prefixes for better organization.
- Enhanced the check_format and check_rtl_style scripts to improve file tracking and naming validation.
- Added new tests to ensure compliance with the updated naming conventions and allowed local parameters in specific contexts.
- Modified dma_core to accommodate a wider data width for FIFO operations.
- Updated filelists to include new DVP source files and formal verification files.
- Introduced formal verification modules for DVP functionality.
- Enhanced clock and reset domain configurations for DVP integration.
- Added DVP interrupt handling in the IRQ topology.
- Implemented a testbench for DVP to validate register access and frame processing.
- Updated software build scripts to include DVP-related source files.
- Adjusted the system topology to reflect the new DVP interrupt and IRQ mapping.
- Deleted the UART interface and related components from the RTL design, including the UART TX/RX signals and instances.
- Removed the timer interface and its associated files from the project, including the timer definitions and references in the integration files.
- Updated the APB target configurations to reflect the removal of the UART and timer components, ensuring the IRQ and memory map configurations are consistent.
- Adjusted the formal verification properties and testbenches to exclude references to the removed components.
- Cleaned up the integration documentation to accurately describe the current state of the system without the UART and timer interfaces.
- Introduced PWM V2 alternate functions in the documentation, detailing the GPIO mappings and fault handling.
- Updated the filelist to include new PWM RTL files for the PWM V2 implementation.
- Modified the SOC topology JSON to reflect new GPIO alternate functions for PWM, including synchronization and capture inputs.
- Updated software makefile to include PWM source and header files.
- Enhanced the APB wrapper to integrate the PWM module with proper parameters.
- Updated the ASIC top-level module to include new GPIO mappings for PWM functionality.
- Added tests to validate the new GPIO and PWM connections in the topology.
- Updated file lists to include new watchdog RTL files in clusterip.
- Replaced async_reqack source in commonip file list with top-level CDC file.
- Modified clock and reset domain configurations to incorporate watchdog reset signals.
- Updated the SoC topology generation script and JSON to reflect changes in watchdog interrupt handling.
- Added watchdog source files to software makefile for compilation.
- Enhanced APB wrapper to connect watchdog reset request signal.
- Updated RCU module to handle watchdog reset requests.
- Modified testbench to validate watchdog reset functionality.
- Updated test cases to reflect changes in interrupt naming conventions for the watchdog.
- Updated filelist to replace old CRC models with new core and register files.
- Added source file for CRC implementation in software.mk.
- Included new CRC header files in the include paths for compilation.
- Introduced signal in sysctrl interface and module to handle RTC wake events.
- Added RTC wake status register in memory map and updated related tests.
- Integrated RTC wake handling in the APB wrapper and core wrapper.
- Enhanced clock and reset domain configurations to include RTC signals.
- Updated software build configurations to include RTC source files and headers.
- Modified formal verification and testbench files to accommodate RTC wake functionality.
- Ensured proper synchronization and status recording for RTC wake events in the sysctrl module.
- Updated the PS2 interface in the APB wrapper to include RX and TX FIFO depths.
- Replaced the kdb_model with ps2_device_model in the testbench for better PS2 handling.
- Added new PS2 source files and headers for keyboard and mouse functionality.
- Refactored GPIO alternate functions to support PS2 clock and data signals.
- Implemented PS2 decoder tests for keyboard and mouse in the runtime tests.
- Updated the software makefile to include new PS2 source files and headers.
- Modified the topology tests to validate PS2 GPIO assignments.
- Updated Makefile to include a check for the RNG metadata script and added a dependency for it.
- Modified memory_map.json to change the user access level of APB_RNG to 'none'.
- Updated clusterip filelist to include new RNG source files.
- Adjusted generate_soc_topology.py to replace the reserved IRQ with the RNG IRQ.
- Updated soc_topology.json to reflect the new RNG interrupt configuration.
- Added RNG source files to software.mk for compilation.
- Enhanced ip_apb_wrapper.sv to instantiate the RNG core and connect it to the APB interface.
- Updated test_memory_map.py to ensure SOC_ADDR_IS_APB_RNG is not defined.
- Modified test_script_tools.py to ensure dry runs do not write filelists.
- Updated test_soc_topology.py to verify the new RNG IRQ and adjust the user IRQ mask.
- Introduced scripts and makefile targets for generating architecture information metadata.
- Updated the filelist generation to include archinfo metadata files.
- Modified software.mk to include archinfo source files and headers.
- Enhanced the ip_apb_wrapper and user_ip_wrapper to integrate archinfo components.
- Updated tests to ensure stability and correct path expansions for generated files.
- Removed unnecessary files from the clusterip filelist.
- Updated to include I2C1 in IRQ bindings.
- Modified to increase IRQ group width and add I2C1 interrupt.
- Enhanced to include I2C formal properties and adjust timeouts.
- Added I2C-related source files to the formal verification flow.
- Updated DMA wrapper in to handle I2C DMA signals.
- Created a new testbench for I2C functionality verification.
- Implemented I2C helper functions in for testing.
- Added I2C tests in to validate controller behavior and recovery.
- Updated existing tests to accommodate changes in DMA and IRQ handling.
- Updated filelist to include new UART source files.
- Enhanced formal file generation script to support UART target.
- Introduced formal verification module and properties for UART.
- Modified makefiles to include UART in formal targets and source files.
- Added UART-related source files to software build.
- Updated top-level wrapper to integrate UART DMA signals.
- Implemented UART testbench for comprehensive testing of functionality.
- Created Python test script for UART V2 register, FIFO, and interrupt tests.
- Added UART helper functions in C test runtime.
- Updated DMA error testbench to handle UART signals.
- Ensured WS2812 DMA testbench accommodates UART signals.
- Updated to include for testing.
- Modified to include GPIO header and added tests for GPIO functionality.
- Created a new testbench for GPIO V2, covering register and pad-control contracts.
- Removed obsolete and its associated test.
- Updated to include GPIO admin base routing.
- Added a new Python test for GPIO V2 register and pad-control contract.
- Removed as its functionality is now covered in .
- Updated memory map tests to ensure GPIO admin base is correctly referenced.
- Adjusted formal filelist generation to reflect changes in GPIO handling.
- Enhanced SOC topology tests to include GPIO interrupt handling.
- Updated the formal file list generator to include CLINT source files.
- Added CLINT timebase to the clock and reset domains configuration.
- Enhanced the SOC topology generation to include CLINT interrupts and their mappings.
- Introduced a new CLINT testbench to validate multi-hart and timebase functionality.
- Modified the software build configuration to define CLINT timebase frequency.
- Updated the RCU module to integrate CLINT timebase generation.
- Adjusted the IRQ configuration to reflect changes in CLINT interrupt signals.
- Added user-visible flags for interrupts in the topology configuration.
- Enhanced the clock reset domain checks to include CLINT timebase.
- Updated the memory map tests to validate CLINT peripheral integration.
- Updated filelist to include new timer peripheral files.
- Enhanced formal file generation script to support timer target.
- Created timer formal design and properties for formal verification.
- Modified formal makefile to include timer targets and source files.
- Added timer-related source files to software makefile.
- Updated core and management wrappers to include debug halted signal.
- Implemented timer testbench for RTL simulation.
- Added regression tests for timer functionality in Python.
- Introduced timer helper functions in C tests for validation.
- Replace onewire interface with ws2812 interface in retrosoc module.
- Include ws2812_math.c in C test sources.
- Add ws2812 header in test_runtime.c and implement ws2812 helper tests.
- Update ribp_topology_tb and soc_irq_topology_tb to handle ws2812 interface.
- Create ws2812_dma_tb and ws2812_tb for testing WS2812 DMA and waveform functionality.
- Enhance test_script_tools.py to include ws2812 in formal filelists.
- Modify test_soc_topology.py to ensure proper IRQ mapping for ws2812.
- Introduce test_ws2812.py for WS2812 register, waveform, and streaming regression tests.
- Introduced test status signals (test_done_o, test_pass_o, test_code_o) in sysctrl interface and module.
- Updated memory map to include TEST_STATUS offset.
- Enhanced retrosoc_tb to monitor test completion and report results.
- Modified Emulator to handle test status and return appropriate exit codes.
- Updated formal verification to include assertions for test status.
- Added CoreMark log parsing script and integrated it into the regression tests.
- Implemented tests for test status handling in sysctrl_fault_tb.
- Adjusted simulation success and failure markers in various scripts and tests.
- Ensured compatibility with existing performance logging and regression testing frameworks.
- Eliminated the HAVE_DEBUG preprocessor directive and all associated code from the RTL and test files.
- Updated the Emulator class to remove JTAG-related debug signals and configurations.
- Adjusted the pin map and JSON configurations to exclude debug-related entries.
- Modified the management core wrapper to only support the HAZARD3 core, removing references to the PICORV32 core.
- Updated tests to reflect the removal of the HAVE_DEBUG feature, ensuring they no longer check for debug-related conditions.
- Cleaned up various scripts and makefiles to remove dependencies on the HAVE_DEBUG flag, streamlining the build process.
- Implemented module to handle debug reset requests, ensuring proper synchronization with the AHB-Lite bridge.
- Created to integrate JTAG-DTM and Debug Module, facilitating abstract command exposure.
- Updated and modules to include JTAG interface signals.
- Enhanced the development environment with scripts for running debug sessions using OpenOCD and GDB.
- Added tests for management debug reset functionality and JTAG integration, ensuring correct behavior under various scenarios.
- Updated SDC generation to include JTAG clock domain and port requirements.
- Modified various scripts to support new debug features and ensure compatibility with the Hazard3 architecture.
- Updated NMI interface references from to in multiple files for consistency.
- Added a new script to convert UART performance records into structured JSON format.
- Enhanced the README documentation to include details about the new performance log parser.
- Implemented tests for the new performance log parser to ensure correct functionality.
- Added new test cases for DMA error handling and SDRAM data integrity to improve coverage.
- Updated existing test cases to accommodate changes in the NMI interface and added performance metrics.
- Refactored bus fault testbench to include fault code checks and improved error handling.
- Adjusted memory map generation and pin mapping tests to reflect recent changes in RTL structure.
- Removed CORE and IP variables from common.tcl and synth.tcl scripts.
- Updated yosys.mk to exclude CORE and IP from environment variables.
- Modified bus_fault_tb to enhance NMI interface with management and user NMI signals.
- Added user access denial handling in bus_fault_tb.
- Updated pll_ctrl_tb and sysctrl_fault_tb to reflect changes in NMI interface.
- Adjusted test_gpio_user_mux.py to remove IP_MDD definition.
- Enhanced memory map tests to include user extensions and ensure proper generation.
- Updated test_script_tools.py to reflect changes in core management and user extensions.
- Refined topology tests to ensure user APB target is always added.
- Adjusted tech cell configuration tests to use simplified profile paths.
- Improved user extensions tests for scalar bindings and slot validation.
- Adjusted variable alignment in Makefiles for better readability.
- Ensured consistent formatting across various Makefiles and scripts.
- Added a new .bake.toml file to define project formatting policies for mbake.
- Updated paths and variable definitions in multiple configuration files to enhance clarity.
- Removed unnecessary comments and whitespace for cleaner code.
- Removed legacy clock definitions and added a dynamic PLL timing template in retrosoc_pll.sdc.
- Introduced a new SystemVerilog testbench (pll_ctrl_tb.sv) for the PLL controller, including clock generation, register read/write tasks, and validation of PLL configuration and timing.
- Updated sysctrl_fault_tb.sv to include PLL controller interface and initialization.
- Enhanced memory map tests to verify PLL configuration and status offsets.
- Added tests for PLL controller dynamic reconfiguration and fallback to safe clock.
- Updated core_wrapper and mgmt_core_wrapper to use new SOC reset and IRQ addresses.
- Removed obsolete mmap_define.svh file and integrated memory map generation into the build process.
- Enhanced ip_nmi_wrapper to handle fault signals and updated NMI interface assignments.
- Added bus fault and sysctrl fault testbenches to validate fault handling mechanisms.
- Improved memory map generation script and added tests for memory map validation and fault responder behavior.
maksyuki