mirror of
https://github.com/retroSoC/retroSoC.git
synced 2026-11-04 22:32:36 +00:00
maksyuki
6bb5dc2344
- Updated RTL style audit to reflect new APB4 naming conventions. - Changed performance log parsing to accommodate new APB4 wait signals. - Modified AXI4 interconnect and rib bus testbenches to use updated performance wait signals. - Adjusted IRQ topology testbench to use new APB4 peripheral and system IRQ widths. - Updated sysctrl testbench to reflect changes in APB4 performance wait signals. - Refined memory map tests to check for new APB4 definitions. - Enhanced performance log tests to validate new APB4 wait signal parsing. - Revised SOC topology tests to ensure correct APB4 peripheral and system bindings. - Updated user extensions tests to align with new APB4 interface naming.
210 lines
7.4 KiB
Systemverilog
210 lines
7.4 KiB
Systemverilog
`timescale 1ns / 1ps
|
|
|
|
module sysctrl_tb;
|
|
logic clk_i = 1'b0;
|
|
logic rst_n_i = 1'b0;
|
|
logic fault_valid_i = 1'b0;
|
|
logic [31:0] fault_addr_i = '0;
|
|
logic [ 3:0] fault_wstrb_i = '0;
|
|
logic fault_reserved_i = 1'b0;
|
|
apb4_if apb4 (
|
|
.pclk (clk_i),
|
|
.presetn(rst_n_i)
|
|
);
|
|
sysctrl_if sysctrl ();
|
|
pll_ctrl_if pll_ctrl ();
|
|
|
|
always #5 clk_i = ~clk_i;
|
|
|
|
apb4_sysctrl u_sysctrl (
|
|
.clk_i (clk_i),
|
|
.rst_n_i (rst_n_i),
|
|
.fault_valid_i (fault_valid_i),
|
|
.fault_addr_i (fault_addr_i),
|
|
.fault_wstrb_i (fault_wstrb_i),
|
|
.fault_reserved_i(fault_reserved_i),
|
|
.apb4 (apb4),
|
|
.sysctrl (sysctrl),
|
|
.pll_ctrl (pll_ctrl)
|
|
);
|
|
|
|
task automatic read_register(input logic [31:0] address, output logic [31:0] data);
|
|
begin
|
|
@(negedge clk_i);
|
|
apb4.paddr = address;
|
|
apb4.pwdata = '0;
|
|
apb4.pstrb = '0;
|
|
apb4.pwrite = 1'b0;
|
|
apb4.psel = 1'b1;
|
|
apb4.penable = 1'b0;
|
|
@(negedge clk_i);
|
|
apb4.penable = 1'b1;
|
|
while (!apb4.pready) @(negedge clk_i);
|
|
if (apb4.pslverr !== 1'b0) begin
|
|
$fatal(1, "read %h error=%b expected=%b", address, apb4.pslverr, 1'b0);
|
|
end
|
|
data = apb4.prdata;
|
|
apb4.psel = 1'b0;
|
|
apb4.penable = 1'b0;
|
|
end
|
|
endtask
|
|
|
|
task automatic write_register(input logic [31:0] address, input logic [31:0] data);
|
|
begin
|
|
@(negedge clk_i);
|
|
apb4.paddr = address;
|
|
apb4.pwdata = data;
|
|
apb4.pstrb = 4'hF;
|
|
apb4.pwrite = 1'b1;
|
|
apb4.psel = 1'b1;
|
|
apb4.penable = 1'b0;
|
|
@(negedge clk_i);
|
|
apb4.penable = 1'b1;
|
|
while (!apb4.pready) @(negedge clk_i);
|
|
if (apb4.pslverr !== 1'b0) begin
|
|
$fatal(1, "write %h error=%b expected=%b", address, apb4.pslverr, 1'b0);
|
|
end
|
|
apb4.psel = 1'b0;
|
|
apb4.penable = 1'b0;
|
|
apb4.pwrite = 1'b0;
|
|
apb4.pstrb = '0;
|
|
end
|
|
endtask
|
|
|
|
logic [31:0] read_data;
|
|
initial begin
|
|
apb4.psel = 1'b0;
|
|
apb4.paddr = '0;
|
|
apb4.pwdata = '0;
|
|
apb4.pstrb = '0;
|
|
sysctrl.user_bus_idle_i = 1'b1;
|
|
sysctrl.fault_access_i = 1'b0;
|
|
sysctrl.fault_master_i = '0;
|
|
sysctrl.fault_code_i = `RIB_RESP_RESERVED;
|
|
sysctrl.perf_mgmt_wait_i = 64'd11;
|
|
sysctrl.perf_user_wait_i = 64'd12;
|
|
sysctrl.perf_dma_wait_i = 64'd13;
|
|
sysctrl.perf_apb4_periph_wait_i = 64'd14;
|
|
sysctrl.perf_apb4_system_wait_i = 64'd15;
|
|
sysctrl.perf_sdram_wait_i = 64'd16;
|
|
sysctrl.perf_psram_wait_i = 64'd17;
|
|
sysctrl.perf_flash_wait_i = 64'd18;
|
|
sysctrl.rtc_wake_i = 1'b0;
|
|
pll_ctrl.req_ready_i = 1'b1;
|
|
pll_ctrl.rsp_active_sel_i = '0;
|
|
pll_ctrl.rsp_active_valid_i = 1'b0;
|
|
pll_ctrl.rsp_safe_clk_i = 1'b1;
|
|
pll_ctrl.rsp_pll_lock_i = 1'b0;
|
|
pll_ctrl.rsp_error_i = '0;
|
|
pll_ctrl.rsp_valid_i = 1'b0;
|
|
pll_ctrl.capable_i = 1'b0;
|
|
repeat (2) @(posedge clk_i);
|
|
rst_n_i = 1'b1;
|
|
|
|
@(negedge clk_i);
|
|
fault_valid_i = 1'b1;
|
|
fault_addr_i = 32'h1000_F000;
|
|
fault_wstrb_i = 4'hF;
|
|
fault_reserved_i = 1'b1;
|
|
@(negedge clk_i);
|
|
fault_valid_i = 1'b0;
|
|
|
|
read_register(32'h1000_B010, read_data);
|
|
if (read_data !== 32'h0000_000B) $fatal(1, "fault status was not recorded");
|
|
read_register(32'h1000_B014, read_data);
|
|
if (read_data !== 32'h1000_F000) $fatal(1, "fault address was not recorded");
|
|
read_register(32'h1000_B018, read_data);
|
|
if (read_data !== 32'h0000_0001) $fatal(1, "fault count was not incremented");
|
|
read_register(32'h1000_B02C, read_data);
|
|
if (read_data !== `RIB_RESP_RESERVED) $fatal(1, "fault detail was not recorded");
|
|
|
|
@(negedge clk_i);
|
|
sysctrl.fault_code_i = `RIB_RESP_DECERR;
|
|
fault_valid_i = 1'b1;
|
|
fault_addr_i = 32'hA000_0000;
|
|
fault_wstrb_i = 4'h0;
|
|
fault_reserved_i = 1'b0;
|
|
@(negedge clk_i);
|
|
fault_valid_i = 1'b0;
|
|
read_register(32'h1000_B014, read_data);
|
|
if (read_data !== 32'h1000_F000) $fatal(1, "later fault overwrote first fault address");
|
|
read_register(32'h1000_B018, read_data);
|
|
if (read_data !== 32'h0000_0002) $fatal(1, "later fault did not increment count");
|
|
read_register(32'h1000_B02C, read_data);
|
|
if (read_data !== `RIB_RESP_RESERVED) $fatal(1, "later fault overwrote first fault detail");
|
|
|
|
write_register(32'h1000_B010, 32'h0000_0001);
|
|
read_register(32'h1000_B010, read_data);
|
|
if (read_data !== 32'h0000_000A) $fatal(1, "fault W1C did not clear pending");
|
|
|
|
write_register(32'h1000_B040, 32'h0000_0005);
|
|
read_register(32'h1000_B044, read_data);
|
|
if (read_data !== 32'd11) $fatal(1, "performance snapshot was not recorded");
|
|
|
|
read_register(32'h1000_B020, read_data);
|
|
if (read_data !== 32'h0000_003F) $fatal(1, "user cores were not held in reset");
|
|
write_register(32'h1000_B000, 32'h0000_0006);
|
|
read_register(32'h1000_B024, read_data);
|
|
if ((read_data & 32'h0000_083F) !== 32'h0000_0800) begin
|
|
$fatal(1, "out-of-range user core selection was accepted");
|
|
end
|
|
write_register(32'h1000_B024, 32'h0000_0800);
|
|
write_register(32'h1000_B000, 32'h0000_0001);
|
|
write_register(32'h1000_B020, 32'h0000_003D);
|
|
read_register(32'h1000_B024, read_data);
|
|
if ((read_data & 32'h0000_0300) !== 32'h0000_0300 || (read_data & 32'h1F) != 1) begin
|
|
$fatal(1, "user core start state was not recorded");
|
|
end
|
|
write_register(32'h1000_B020, 32'h0000_003F);
|
|
read_register(32'h1000_B024, read_data);
|
|
if ((read_data & 32'h0000_0300) !== 32'h0000_0200) begin
|
|
$fatal(1, "user core stop state was not recorded");
|
|
end
|
|
|
|
read_register(32'h1000_B084, read_data);
|
|
if (read_data !== 32'h0000_0000) begin
|
|
$fatal(1, "test status did not reset");
|
|
end
|
|
write_register(32'h1000_B084, 32'h0000_5A01);
|
|
read_register(32'h1000_B084, read_data);
|
|
if (read_data !== 32'h0000_0000) begin
|
|
$fatal(1, "invalid test status write was accepted");
|
|
end
|
|
write_register(32'h1000_B084, 32'h8000_5A01);
|
|
read_register(32'h1000_B084, read_data);
|
|
if (read_data !== 32'h8000_5A01) begin
|
|
$fatal(1, "test pass status was not recorded");
|
|
end
|
|
write_register(32'h1000_B084, 32'h8000_0B00);
|
|
read_register(32'h1000_B084, read_data);
|
|
if (read_data !== 32'h8000_5A01) begin
|
|
$fatal(1, "terminal test status was overwritten");
|
|
end
|
|
|
|
read_register(32'h1000_B088, read_data);
|
|
if (read_data !== 32'h0000_0000) begin
|
|
$fatal(1, "RTC wake status did not reset");
|
|
end
|
|
sysctrl.rtc_wake_i = 1'b1;
|
|
repeat (4) @(posedge clk_i);
|
|
read_register(32'h1000_B088, read_data);
|
|
if (read_data !== 32'h0000_0003) begin
|
|
$fatal(1, "RTC wake live and sticky status was not recorded");
|
|
end
|
|
sysctrl.rtc_wake_i = 1'b0;
|
|
repeat (4) @(posedge clk_i);
|
|
read_register(32'h1000_B088, read_data);
|
|
if (read_data !== 32'h0000_0002) begin
|
|
$fatal(1, "RTC wake sticky status was not retained");
|
|
end
|
|
write_register(32'h1000_B088, 32'h0000_0002);
|
|
read_register(32'h1000_B088, read_data);
|
|
if (read_data !== 32'h0000_0000) begin
|
|
$fatal(1, "RTC wake sticky status W1C failed");
|
|
end
|
|
|
|
$display("SystemCtrl register, lifecycle, fault, performance, and RTC wake test passed");
|
|
$finish;
|
|
end
|
|
endmodule
|