mirror of
https://github.com/retroSoC/retroSoC.git
synced 2026-11-04 22:32:36 +00:00
maksyuki
6eedacd2f7
- Updated test files to change instances of ribp_if to apb4_if in various test cases, ensuring consistency with the new APB4 interface. - Modified assertions and checks in tests to reflect the new APB4 naming conventions, including changes in expected output and input files. - Adjusted the test descriptions to accurately represent the APB4 functionality being tested, particularly in timer, UART, and GPIO tests. - Ensured that all relevant paths and file names in the tests are updated to point to the new APB4 implementations, maintaining the integrity of the test suite.
105 lines
3.5 KiB
Systemverilog
105 lines
3.5 KiB
Systemverilog
// Copyright (c) 2026 Yuchi Miao <miaoyuchi@ict.ac.cn>
|
|
// retroSoC is licensed under Mulan PSL v2.
|
|
|
|
module apb4_gpio #(
|
|
parameter int PinNum = 32,
|
|
parameter logic [31:0] UserBaseAddr = 32'h1000_0000,
|
|
parameter logic [31:0] AdminBaseAddr = 32'h1001_4000,
|
|
parameter bit HasInputCmos = 1'b0,
|
|
parameter bit HasPullUp = 1'b0,
|
|
parameter bit HasPullDown = 1'b0
|
|
) (
|
|
// verilog_format: off -- preserve reviewed column alignment
|
|
input logic clk_i,
|
|
input logic rst_n_i,
|
|
apb4_if.slave apb4,
|
|
gpio_if.dut gpio,
|
|
user_gpio_if.padctrl user_gpio
|
|
// verilog_format: on
|
|
);
|
|
|
|
logic [PinNum-1:0] s_data_in;
|
|
logic [PinNum-1:0] s_data_out;
|
|
logic [PinNum-1:0] s_output_en;
|
|
logic [PinNum-1:0] s_open_drain;
|
|
logic [PinNum-1:0] s_input_cmos;
|
|
logic [PinNum-1:0] s_pull_up;
|
|
logic [PinNum-1:0] s_pull_down;
|
|
logic [PinNum-1:0] s_alt_en;
|
|
logic [PinNum-1:0] s_alt_sel;
|
|
logic [PinNum-1:0] s_user_sel;
|
|
logic [PinNum-1:0] s_user_handoff;
|
|
logic [PinNum-1:0] s_filter_en;
|
|
logic [ 15:0] s_filter_div;
|
|
logic [ 3:0] s_filter_count;
|
|
logic [PinNum-1:0] s_intr_rise_en;
|
|
logic [PinNum-1:0] s_intr_fall_en;
|
|
logic [PinNum-1:0] s_intr_high_en;
|
|
logic [PinNum-1:0] s_intr_low_en;
|
|
logic [PinNum-1:0] s_intr_event;
|
|
logic s_irq;
|
|
|
|
gpio_reg #(
|
|
.PinNum (PinNum),
|
|
.UserBaseAddr (UserBaseAddr),
|
|
.AdminBaseAddr(AdminBaseAddr),
|
|
.HasInputCmos (HasInputCmos),
|
|
.HasPullUp (HasPullUp),
|
|
.HasPullDown (HasPullDown)
|
|
) u_gpio_reg (
|
|
.clk_i (clk_i),
|
|
.rst_n_i (rst_n_i),
|
|
.apb4 (apb4),
|
|
.data_in_i (s_data_in),
|
|
.intr_event_i (s_intr_event),
|
|
.data_out_o (s_data_out),
|
|
.output_enable_o (s_output_en),
|
|
.open_drain_o (s_open_drain),
|
|
.input_cmos_o (s_input_cmos),
|
|
.pull_up_o (s_pull_up),
|
|
.pull_down_o (s_pull_down),
|
|
.alt_enable_o (s_alt_en),
|
|
.alt_select_o (s_alt_sel),
|
|
.user_select_o (s_user_sel),
|
|
.user_handoff_o (s_user_handoff),
|
|
.filter_enable_o (s_filter_en),
|
|
.filter_div_o (s_filter_div),
|
|
.filter_count_o (s_filter_count),
|
|
.intr_rise_enable_o(s_intr_rise_en),
|
|
.intr_fall_enable_o(s_intr_fall_en),
|
|
.intr_high_enable_o(s_intr_high_en),
|
|
.intr_low_enable_o (s_intr_low_en),
|
|
.irq_o (s_irq)
|
|
);
|
|
|
|
gpio_core #(
|
|
.PinNum(PinNum)
|
|
) u_gpio_core (
|
|
.clk_i (clk_i),
|
|
.rst_n_i (rst_n_i),
|
|
.data_out_i (s_data_out),
|
|
.output_enable_i (s_output_en),
|
|
.open_drain_i (s_open_drain),
|
|
.input_cmos_i (s_input_cmos),
|
|
.pull_up_i (s_pull_up),
|
|
.pull_down_i (s_pull_down),
|
|
.alt_enable_i (s_alt_en),
|
|
.alt_select_i (s_alt_sel),
|
|
.user_select_i (s_user_sel),
|
|
.user_handoff_i (s_user_handoff),
|
|
.filter_enable_i (s_filter_en),
|
|
.filter_div_i (s_filter_div),
|
|
.filter_count_i (s_filter_count),
|
|
.intr_rise_enable_i(s_intr_rise_en),
|
|
.intr_fall_enable_i(s_intr_fall_en),
|
|
.intr_high_enable_i(s_intr_high_en),
|
|
.intr_low_enable_i (s_intr_low_en),
|
|
.irq_i (s_irq),
|
|
.data_in_o (s_data_in),
|
|
.intr_event_o (s_intr_event),
|
|
.gpio (gpio),
|
|
.user_gpio (user_gpio)
|
|
);
|
|
|
|
endmodule
|