mirror of
https://github.com/retroSoC/retroSoC.git
synced 2026-11-06 14:55:14 +00:00
maksyuki
c5dfa96c6f
- Replaced instances of nmi_if with rib_if in sysctrl_fault_tb.sv, test_dma.py, test_gpio_user_mux.py, test_memory_map.py, test_performance_log.py, test_script_tools.py, test_sdram.py, test_soc_topology.py, test_sta_constraints.py, and test_user_extensions.py. - Updated test cases to reflect changes from NMI to RIB, ensuring all references and assertions are consistent with the new interface. - Adjusted memory map and performance log tests to validate RIB-specific configurations and behaviors. - Ensured that all relevant file paths and definitions are updated to maintain functionality and correctness across the test suite.
128 lines
3.5 KiB
Systemverilog
128 lines
3.5 KiB
Systemverilog
`timescale 1ns / 1ps
|
|
|
|
module gpio_user_mux_tb;
|
|
logic clk_i = 1'b0;
|
|
logic rst_n_i = 1'b0;
|
|
rib_if rib ();
|
|
gpio_if gpio ();
|
|
user_gpio_if user_gpio ();
|
|
logic [31:0] read_data;
|
|
|
|
always #5 clk_i = ~clk_i;
|
|
|
|
rib_gpio dut (
|
|
.clk_i (clk_i),
|
|
.rst_n_i (rst_n_i),
|
|
.rib (rib),
|
|
.gpio (gpio),
|
|
.user_gpio(user_gpio)
|
|
);
|
|
|
|
task automatic write_register(input logic [7:0] address, input logic [31:0] data);
|
|
begin
|
|
@(negedge clk_i);
|
|
rib.addr = {24'd0, address};
|
|
rib.wdata = data;
|
|
rib.wstrb = 4'hF;
|
|
rib.valid = 1'b1;
|
|
@(posedge clk_i);
|
|
#1;
|
|
@(negedge clk_i);
|
|
rib.valid = 1'b0;
|
|
@(posedge clk_i);
|
|
#1;
|
|
end
|
|
endtask
|
|
|
|
task automatic read_register(input logic [7:0] address, output logic [31:0] data);
|
|
begin
|
|
@(negedge clk_i);
|
|
rib.addr = {24'd0, address};
|
|
rib.wdata = '0;
|
|
rib.wstrb = '0;
|
|
rib.valid = 1'b1;
|
|
@(posedge clk_i);
|
|
#1;
|
|
data = rib.rdata;
|
|
@(negedge clk_i);
|
|
rib.valid = 1'b0;
|
|
@(posedge clk_i);
|
|
#1;
|
|
end
|
|
endtask
|
|
|
|
task automatic select_user_gpio(input logic [31:0] selection);
|
|
begin
|
|
@(negedge clk_i);
|
|
rib.addr = 32'h0000_0030;
|
|
rib.wdata = selection;
|
|
rib.wstrb = 4'hF;
|
|
rib.valid = 1'b1;
|
|
@(posedge clk_i);
|
|
#1;
|
|
if (gpio.oe_o[0] !== 1'b0) $fatal(1, "GPIO handoff did not drive high impedance");
|
|
@(negedge clk_i);
|
|
rib.valid = 1'b0;
|
|
@(posedge clk_i);
|
|
#1;
|
|
end
|
|
endtask
|
|
|
|
initial begin
|
|
rib.valid = 1'b0;
|
|
rib.addr = '0;
|
|
rib.wdata = '0;
|
|
rib.wstrb = '0;
|
|
gpio.di_i = '0;
|
|
gpio.alt0_do_i = '0;
|
|
gpio.alt0_oe_i = '0;
|
|
gpio.alt1_do_i = '0;
|
|
gpio.alt1_oe_i = '0;
|
|
user_gpio.do_o = '0;
|
|
user_gpio.oe_o = '0;
|
|
|
|
repeat (2) @(posedge clk_i);
|
|
rst_n_i = 1'b1;
|
|
repeat (2) @(posedge clk_i);
|
|
|
|
write_register(8'h00, 32'h0000_0001);
|
|
write_register(8'h10, 32'h0000_0001);
|
|
if ({gpio.oe_o[0], gpio.do_o[0]} !== 2'b11) $fatal(1, "rib software GPIO is not active");
|
|
|
|
user_gpio.do_o[0] = 1'b0;
|
|
user_gpio.oe_o[0] = 1'b1;
|
|
select_user_gpio(32'h0000_0001);
|
|
if ({gpio.oe_o[0], gpio.do_o[0]} !== 2'b10) $fatal(1, "user GPIO was not selected");
|
|
read_register(8'h30, read_data);
|
|
if (read_data !== 32'h0000_0001) $fatal(1, "USER_SEL readback is incorrect");
|
|
read_register(8'h38, read_data);
|
|
if (read_data !== 32'h0000_0001) $fatal(1, "USER_STATUS is not active after handoff");
|
|
|
|
gpio.di_i[0] = 1'b1;
|
|
#1;
|
|
if (user_gpio.di_i[0] !== 1'b1) $fatal(1, "user GPIO input path is disconnected");
|
|
|
|
write_register(8'h34, 32'h0000_0001);
|
|
read_register(8'h34, read_data);
|
|
if (read_data !== 32'h0000_0001) $fatal(1, "USER_LOCK is not write-one-set");
|
|
write_register(8'h30, '0);
|
|
if ({gpio.oe_o[0], gpio.do_o[0]} !== 2'b10) $fatal(1, "USER_LOCK did not preserve ownership");
|
|
read_register(8'h30, read_data);
|
|
if (read_data !== 32'h0000_0001) $fatal(1, "locked USER_SEL changed");
|
|
|
|
gpio.alt0_do_i[1] = 1'b1;
|
|
gpio.alt0_oe_i[1] = 1'b1;
|
|
write_register(8'h28, 32'h0000_0002);
|
|
if ({gpio.oe_o[1], gpio.do_o[1]} !== 2'b11) $fatal(1, "alternate GPIO mode regressed");
|
|
|
|
write_register(8'h04, 32'h0000_0001);
|
|
write_register(8'h08, 32'h0000_0001);
|
|
write_register(8'h0C, 32'h0000_0001);
|
|
if ({gpio.cs_o[0], gpio.pu_o[0], gpio.pd_o[0]} !== 3'b111)
|
|
$fatal(1, "rib GPIO electrical controls changed under user ownership");
|
|
|
|
$display("GPIO user ownership test passed");
|
|
$finish;
|
|
end
|
|
endmodule
|