- Introduced a new testbench for the SDIO wrapper () to validate APB interactions.
- Updated to include IRQ handling for SDIO0 and SDIO1.
- Enhanced to account for performance management of SDIO0 and SDIO1.
- Modified memory map tests to include SDIO base addresses and performance wait offsets.
- Updated pin mapping tests to include SDIO1 signals.
- Created a comprehensive suite of SDIO tests () covering various functionalities including CRC, command engine, DMA, and standalone operations.
- Added a new test for verifying SDIO register parity against the RTL definition.
- Adjusted SOC topology tests to reflect the addition of SDIO in the IRQ and APB fabric.
- Updated test files to change instances of ribp_if to apb4_if in various test cases, ensuring consistency with the new APB4 interface.
- Modified assertions and checks in tests to reflect the new APB4 naming conventions, including changes in expected output and input files.
- Adjusted the test descriptions to accurately represent the APB4 functionality being tested, particularly in timer, UART, and GPIO tests.
- Ensured that all relevant paths and file names in the tests are updated to point to the new APB4 implementations, maintaining the integrity of the test suite.
- Introduced a new testbench for the AXI4 interconnect () to validate fault classification for decode and access errors.
- Updated and to reflect changes in bus naming conventions.
- Enhanced to include AXI4-Stream interface checks and validate stream data transfers.
- Modified to integrate AXI4-Stream interfaces for improved DMA testing.
- Added new Python tests () to verify AXI4 to RIBP burst bridge functionality and interconnect fault classification.
- Updated existing tests to include AXI4 interfaces and ensure proper error handling and response validation.
- Adjusted memory map generation and test setups to accommodate new AXI4 interface requirements.
- Changed the interface from ribp to rib in soc_topology.json and related files.
- Updated formal.mk to reflect the new rib2apb naming convention.
- Implemented rib2apb module to handle RIB to APB communication.
- Modified bus.sv to integrate the new rib2apb module and adjust signal assignments accordingly.
- Updated testbench files to use the new rib interface and validate the RIB to APB functionality.
- Created rib2apb_tb for testing the direct RIB to APB bridge.
- Adjusted script tools and test scripts to accommodate the new naming and structure.
- Renamed and to and respectively across various test files and modules.
- Updated response codes in tests to use new definitions ().
- Added new testbench to validate RIB to RAM interactions.
- Created for testing RIBP topology routing.
- Adjusted memory map tests to reflect new interface names.
- Ensured all references to old interface names were replaced in Python test scripts.
- Verified that all test cases pass with the new interface structure.
- Updated test cases in , , , , , , , and to replace references from RIB to RIBP.
- Modified file names and paths in tests to align with the new RIBP naming conventions.
- Ensured that all assertions and checks in the tests are consistent with the updated RIBP interfaces and functionality.
- Added a new test for migrating user core RIBP interfaces in .
- Updated dma_error_tb to implement burst transfer handling and performance measurement for INCR4 transfers.
- Introduced rib_burst_bus_tb to validate RIB burst arbitration and protocol compliance.
- Added soc_rib_burst_ram_tb to test SRAM behavior with burst commands.
- Created spill_register_tb to verify the functionality of the spill register under various conditions.
- Modified test_dma.py to reflect changes in DMA error handling and performance reporting.
- Updated test_memory_map.py to include new RIB burst interfaces and spill register utilities.
- Enhanced test_rib_burst.py with directed tests for RIB burst building blocks and spill register behavior.
- Adjusted test_soc_topology.py to ensure correct instantiation counts for RIB interfaces.
- Improved test_user_extensions.py to validate the generation of isolated scalar bindings for burst interfaces.
- Replaced instances of nmi_if with rib_if in sysctrl_fault_tb.sv, test_dma.py, test_gpio_user_mux.py, test_memory_map.py, test_performance_log.py, test_script_tools.py, test_sdram.py, test_soc_topology.py, test_sta_constraints.py, and test_user_extensions.py.
- Updated test cases to reflect changes from NMI to RIB, ensuring all references and assertions are consistent with the new interface.
- Adjusted memory map and performance log tests to validate RIB-specific configurations and behaviors.
- Ensured that all relevant file paths and definitions are updated to maintain functionality and correctness across the test suite.
- Updated NMI interface references from to in multiple files for consistency.
- Added a new script to convert UART performance records into structured JSON format.
- Enhanced the README documentation to include details about the new performance log parser.
- Implemented tests for the new performance log parser to ensure correct functionality.
- Added new test cases for DMA error handling and SDRAM data integrity to improve coverage.
- Updated existing test cases to accommodate changes in the NMI interface and added performance metrics.
- Refactored bus fault testbench to include fault code checks and improved error handling.
- Adjusted memory map generation and pin mapping tests to reflect recent changes in RTL structure.
- Removed CORE and IP variables from common.tcl and synth.tcl scripts.
- Updated yosys.mk to exclude CORE and IP from environment variables.
- Modified bus_fault_tb to enhance NMI interface with management and user NMI signals.
- Added user access denial handling in bus_fault_tb.
- Updated pll_ctrl_tb and sysctrl_fault_tb to reflect changes in NMI interface.
- Adjusted test_gpio_user_mux.py to remove IP_MDD definition.
- Enhanced memory map tests to include user extensions and ensure proper generation.
- Updated test_script_tools.py to reflect changes in core management and user extensions.
- Refined topology tests to ensure user APB target is always added.
- Adjusted tech cell configuration tests to use simplified profile paths.
- Improved user extensions tests for scalar bindings and slot validation.
- Updated core_wrapper and mgmt_core_wrapper to use new SOC reset and IRQ addresses.
- Removed obsolete mmap_define.svh file and integrated memory map generation into the build process.
- Enhanced ip_nmi_wrapper to handle fault signals and updated NMI interface assignments.
- Added bus fault and sysctrl fault testbenches to validate fault handling mechanisms.
- Improved memory map generation script and added tests for memory map validation and fault responder behavior.
maksyuki